ECO
Optical beam smoke and fire detector
The ECO line detector brings together the technology used in ARDEA S and BOOMERANG S in a single system. ECO is presented to the market differently from the other two detectors referred to, as ECO is a fire detection system to be used in civil and artistic buildings as well as churches, and completes our range of linear detectors.
In fact ECO is special: among its special features, with ECO you have the possibility to have both a reflection system detector or a Transmission and Receiver system in a single model. The new microprocessor is capable of managing the sensitivity and the modulation in relation to smoke, making this model a real innovation in the field of linear detection.
ES25-I (2 ÷ 50 m)
ES50 (2 ÷ 50 m)
ES80 (2 ÷ 80 m)
Certifications
It is essentially based on the detection principles of the ARDEA, but unlike the ARDEA it has all the functions integrated into one system, i.e. it does not need an external interface for the remote managing of the ALARM and FAULT events or for the connection with the control units. ECO, in its reflection version, is also available in a flush-mounted housing version.
The detection capabilities of the various models, in compliance with current standards (EN54-12 and EN54-14) are as follows:
ES 50 (reflection with reflector) up to 50 metres, ES 80 (reflection with prism) up to 80 metres and ES 25-I (recessed reflection) up to 50 metres (25m recommended). It is equipped with a new and very useful pair of joints that allow it to be installed even in the most critical conditions.
Models
| ES50 |
|---|
| New generation reflection system with the same basic features and potential as the ECO models below. Given the possibility of working with a single power supply source, it further reduces and simplifies any installation problems, especially where even running a small cable becomes problematic. A pair of joints (SSM) is available on request for installation on non-parallel walls, diagonally or for movement for alignment. |
| ES25-I (flush mounted reflector system) |
| In the ES25-I (Flush-mounted Reflection) version, there is the possibility, by means of diaphragms that reduce its minimum capacity, to detect fires in really small spaces without obstructing furniture or special architectural structures and or features. |
| ES80 |
| New generation reflection detector. It has the same basic features and potential as the other ECO models, but because it can work with a single power supply source, it reduces and simplifies any installation problems even further, especially where even running a small cable becomes problematic. In the ES80 version, ECO has the ability to detect fires in environments such as theatres and large historical buildings, without obstructing valuable furniture or architectural structures. |
ES25-I (2 ÷ 50 m)
ES50 (2 ÷ 50 m)