Calibration and checking instruments
CLI
CLI – PROGRAMMING AND CONTROLLING UNIT FOR ILIA LINEAR DETECTORS
CONTROLLER for programming, managing, monitoring, calibrating, and performing remote tests for Linear Detectors of the ILIA line.
SAC- SIMULATOR
Applied to ARDEA detectors (mod. S/2 and SF in IP44). It allows you to test the correct alignment and adjustment of a smoke and fire sensitivity threshold, relatively immune to transient disturbances, which could otherwise cause untimely alarms. The instrument offers the possibility of being controlled ‘from the ground’ and remote checking from several points.
THE SAC
ADM
ADM-ADAPTER FOR TESTER
An instrument that analyses the environmental disturbances induced on the receiver by the monitored environment. It must be interfaced to a common voltmeter. It allows calibration of the thresholds of the ARDEA and BOOMERANG detectors in the S and SF models, in IP44, EExd, ECO line.
STF4
STF4-SIMULATION FILTER
Optical filter, divided into sections, for checking the correct calibration of any Setronic linear detector model. Its purpose is to simulate the presence of smoke and fire in the monitored environment.